General Lifting

1.3t to 2.5t Foot Anchors are typically cast into smaller precast elements 5t Foot Anchors are used for facelifts of tilt up panels
10t Eye Anchors were used to lift this 28t concrete box unit Canningvale WA 10t Eye anchors used to lift 30t ring units for the cooling seawater intake – Raventhorpe Nickel Project WA


SwiftLift™ Foot Anchor

SwiftLift™ Combination Anchor

Swift Lift™ Eye Anchor

Load range: 1.3t-32t WLL (Max)

Load range: 1.3t-5t WLL (Max)

Load range: 10t-32t WLL (Max)



 Voids Available:

 Part Number

 SwiftLift Anchor
 WLL

Setting Bolt Only

Rubber Ring

Rubber Round
Recess Former

1RFRO
2RFRO
5RFRO
10RFRO
20RFRO
32RFRO

1.3t
2.5t
5.0t
10.0t
20.0t
32.0t

Not required

Not required

Steel Round
Recess Former
Also available as a
magnetised version.

1SRFRO
2SRFRO
5SRFRO
10SRFRO

1.3t
2.5t
5.0t
10.0t

SBM8
SBM12
SBM12
SBM12

1RR
2RR
5RR
10RR

Steel Articulated 
Recess Former

1SRFROART
2SRFROART
5SRFROART

1.3t
2.5t
5.0t

SBM10
SBM10
SBM10

Not required

Plastic Round
Recess Former

2PR
5PR

2.5t
5.0t

Not required

Not required


Refer to the Product Catalogue for dimensional data.
Identification markings are required for the SwiftLift™ Lifting Eye to comply with AS3850 – 2003.
The SwiftLift™ Lifting Eye must be proof load tested every12 months in accordance with AS3850–2003.
The SwiftLift™ Lifting Eye has a FOS (factor of safety) of no less than 5 in accordance with AS3850 – 2003

 


The important markings to look for on Reid SwiftLift Lifting Eyes are shown in the diagram.
1. The manufacturer’s name/logo
2. Nominal size or class of anchors the lifting eye is designed to be used with
3. A test tag showing that the lifting eye has been proof tested to the required proof load for the particular clutch rating/class
4. Manufacturing Batch Certification - a unique number that identifies the specific batch of manufacture