Spartan™ Sideform

Spartan™ Sideform is manufactured from a unique combination of composite materials and offers a multitude of benefits over traditional steel or wood formwork.

  1. Lightweight: Spartan™ Sideform is significantly lighter than steel formwork reducing any potential OH&S issues.
  2. Thick wall sections: Sideform will not bend or buckle. Thick wall sections provide for proper screw bite when fixing fittings to the sideform.
  3. Centre line marking: Spartan™ Sideform provides a horizontal line-of-centre to assistwith the alignment or positioning of fittings
  4. Easy to Clean: Epoxy powder coated Spartan™ Sideform can be easily cleaned and is protected against the elements.
  5. Magnet Securing Rail on the rear of Spartan™ Sideform does not allow concrete to become wedged and is easily removed.
  6. Sideform is colour-coded to reflect the 4 variations in height.
  7. Spartan™ Sideform accommodates interchangeable top capping for height and profile flexibility.
  8. The Spartan™ Sideform also houses the unique Rubber Base Seal which prevents concrete bleed without the need for use of silicone.


Item Code
 Colour
Dimensions (LXH)
Weight (kg)
 SF125
 Green
5.8m X 125mm
17.96
 SF150
 Grey
5.8m X 150mm  19.95
 SF175
 Blue 5.8m X 175mm 22.38
 SF200
 Burgundy 5.8m X 200mm 24.65

Click Here for Spartan Sideform Reference Chart




CLEANING

The unique epoxy powder-coating makes cleaning the sideform easy and more efficient.

Once stripped, clean the sideform surfaces using a damp cloth, the Spartan™ Capping Removal Tool (CAPRT) or a fine plastic bristle brush. Cleaning as soon as possible after stripping will make it easier and will prolong the life of the epoxy coating.

DO NOT clean the sideform using high pressure water cleaners, aggressive detergents or chemicals as these may prematurely wear the epoxy powder-coating, damage the top capping and rubber base – as well as potentially forcing sediment in between the rubber base and the sideform.




PERIODIC MAINTENANCE

 1.  Remove the rubber base from the sideform body and check that both the bottom recess and the base slots are clean.

2.  Turn the sideform upside down and check that the bottom is clean.  If not, use the Spartan™ Capping Removal Tool (CAPRT) to scrape away any foreign materials from the base.

3.  On the back of the Spartan™ Sideform, use the Capping Removal Tool to clean the “Ball Lock Rail” and joiner plate slots.

4.  If there are any sections of top capping showing excessive wear, they can be replaced by removing the capping from the side body and simply cutting out the segment and replacing it with a new section cut to the required size.



 

STORAGE

When not in use, Spartan™ Sideform should be stored in racks.